Risk Guardops • Updated November 2026
📝 Pricing & Premiums • 8 min read

What a $25M Cyber Tower Costs: Pricing Primary and Excess Layers for a $600M Company

A hypothetical $600M company builds a $25M cyber tower layer by layer. See typical 2026 rate-on-line ranges, the terms that quietly raise or cut the bill, and when a smaller tower is the better buy.

SPONSORED CONTEXTUAL PLACEMENT
💼
Evaluating Enterprise Deployments in 2026?

Request our confidential total cost of ownership matrix and vendor RFP templates.

Launch Calculator →

The Decision: $25M of Cyber Limit, Bought in Layers

If your company has around $600M in revenue, your broker has probably shown you a cyber program somewhere between $15M and $35M of limit. It's split into a primary policy and several excess layers, each priced separately. The real question isn't whether $25M is the "right" number. It's whether each $5M or $10M slice is worth its price, and whether the upper-layer terms actually match the primary policy underneath.

This piece builds a $25M tower for a clearly hypothetical company, one layer at a time. It shows where excess cyber insurance cost comes from, how rate on line falls as you climb, and which structural choices (increased limit factors, quota shares, follow-form wording) change the total. All figures are typical 2026 market ranges that vary by contract, region and carrier. Use them as a benchmark for your broker conversation, not as a quote.

Advertisement
RECOMMENDED SOLUTION

Looking to streamline vendor RFP selection?

Access pre-negotiated tier discounts through our independent institutional network.

Compare Pricing →

Meet Company H: The Hypothetical Buyer and Its Loss Scenarios

This is a hypothetical example built for illustration. Company H is a $600M-revenue industrial distributor with about 2,400 employees. It operates in the UK, Germany, the US and India, and runs a central ERP system, e-commerce ordering and a warehouse management platform. EBITDA is roughly $60M.

Its controls are solid but not exceptional:

  • Phishing-resistant MFA for admins and remote access, standard MFA elsewhere
  • EDR on all endpoints with a 24/7 managed detection provider
  • Immutable, restore-tested backups for the ERP, with a 72-hour restore target
  • Privileged access management covering most but not all service accounts
  • Around 1.5 million customer and supplier records, including some payment data handled through a tokenized processor

Before pricing anything, the risk manager and CFO model three scenarios. A contained data breach costs $2M to $4M. A ransomware event that takes the ERP down for 10 days runs $10M to $15M once lost gross profit, extra expense, forensics and legal fees are counted. A severe scenario, a multi-week outage plus regulatory action in several jurisdictions, reaches $20M to $30M. That last scenario is why the conversation starts at $25M.

Pricing the Primary Layer and What Drives It

The primary layer does most of the work. It responds to every claim above the retention, absorbs the frequent mid-sized losses, and sets the wording every excess carrier follows. That's why it carries the highest rate on line in the tower.

For Company H, a $5M primary with a $1M self-insured retention would typically price at a 3.5% to 6% rate on line, or about $175,000 to $300,000. We'll use $225,000 (4.5%) as the working figure.

Where Company H lands in that range depends on:

  • Control evidence. Gaps in MFA coverage, unsupported operating systems or untested backups push you toward the top of the range. Some carriers will decline outright.
  • Retention. Raising it from $1M to $2.5M can cut primary premium noticeably, often by double-digit percentages. It does little for the excess layers.
  • Business interruption profile. A distributor that can't ship when its ERP is down has more BI exposure than a same-size firm with less critical systems.
  • Sublimits. A primary that sublimits ransomware, dependent business interruption or widespread events at $2.5M looks cheaper. It also caps what the excess layers can pay for those perils.

Stacking the Excess Layers: Rate on Line by Attachment Point

Each excess layer attaches higher and is less likely to be hit, so its rate on line declines as you climb. Carriers don't price upper layers near zero, though. Capacity is limited and severe cyber losses tend to cluster, so most carriers hold a minimum rate. For mid-market and large companies, upper layers in 2026 commonly price in the low single digits as a percentage of limit, rarely much lower.

LayerLimit / attachmentTypical 2026 rate on lineIndicative premium rangeCompany H working figure
Primary$5M xs $1M retention3.5%–6.0%$175k–$300k$225k
1st excess$5M xs $5M2.5%–4.5%$125k–$225k$170k
2nd excess$5M xs $10M2.0%–3.5%$100k–$175k$135k
3rd excess$10M xs $15M1.5%–2.75%$150k–$275k$215k
Total tower$25M~2.2%–3.9% blended$550k–$975k$745k

The pattern is the useful part. Each layer usually prices at roughly 70% to 85% of the one beneath it, per dollar of limit. In Company H's working figures, the first $5M costs $225,000 and the top $10M costs $215,000. The top $10M looks cheap per dollar, but most of that premium buys protection against an event that may never happen. Whether that's good value depends on your balance sheet, which the last section covers.

RECOMMENDED SOLUTION

Looking to streamline vendor RFP selection?

Access pre-negotiated tier discounts through our independent institutional network.

Compare Pricing →

Increased Limit Factors: Bigger Primary or Separate Tower?

Some primary carriers will offer more than $5M on a single policy, priced with an increased limit factor (ILF): a multiplier on the base-limit premium. Going from $5M to $10M on one policy commonly carries an ILF somewhere around 1.6 to 1.8, though carriers differ.

For Company H, a $10M primary at an ILF of 1.7 would cost about $382,500. A $5M primary plus a separate $5M excess costs about $395,000. The gap is small, and the single policy has real advantages:

  • One wording, so no gap between primary and excess terms
  • One claims team, which speeds decisions during a ransomware event
  • No exhaustion disputes between two carriers in the first $10M

The downside is concentration. If that carrier tightens appetite or exits a region at renewal, you replace $10M at once instead of $5M. For most companies of this size, a single $10M primary is the better buy if the carrier is financially strong and has a good claims record in your main operating countries. Above $10M, separate excess carriers are usually unavoidable, because few carriers want more than that on one cyber risk.

Quota Share and Follow-Form Terms That Move the Price

Quota-share layers

If no single carrier wants the full $10M xs $15M, the broker can split it. Two carriers might each take 50%, or three might take 40/30/30. Quota shares add capacity and competition, and the blended price can come in a few percent below what one carrier would charge for the whole layer. The catch is coordination. If participants use different wordings or adjust claims at different speeds, payment on a large loss can stall. Insist that every participant follows the same lead terms.

Follow-form versus "follow-form with exceptions"

A true follow-form excess policy adopts the primary's terms. Many cyber excess forms follow form except for specific items: war and infrastructure exclusions, widespread-event sublimits, or the excess carrier's own conditions on paying ransom. An excess quote that looks noticeably cheaper than its peers often carries exceptions like these.

Check every excess layer for these red flags:

  • Sublimits that don't stack. If the primary caps ransomware at $2.5M, the excess layers usually never pay for ransomware. Your real ransomware tower is $2.5M, not $25M.
  • Strict exhaustion language. Wording that requires underlying limits to be exhausted only by actual payment from the underlying insurers can block recovery if you settle with a lower layer at a discount.
  • Different war or state-actor exclusions between primary and excess.
  • No drop-down provision if an underlying carrier becomes insolvent.

Taxes, Local Policies and Costs Outside the Premium

The $745,000 is net premium. What Company H actually pays will be higher, and by how much depends on where the policies are issued.

  • Premium taxes vary widely. The UK charges insurance premium tax at a double-digit rate, Germany applies its own insurance tax, and India applies GST to insurance premiums. In the US, surplus lines taxes and fees vary by state. Australia adds GST and state stamp duty. Get current rates from your broker for each jurisdiction.
  • Locally admitted policies. Some countries, including India, Brazil and China, restrict or prohibit cover from non-admitted insurers. A multinational may need local policies under a master program. Each adds fronting fees and administration, often a few percent of the allocated premium.
  • Broker compensation. Commission is often built into the premium. Large buyers may negotiate a fee instead. Either way, ask for disclosure.
  • Retention funding. The $1M retention is a real cost in every claim year. Budget for it.

Rules on paying ransoms, notifying regulators and indemnifying fines also differ by country. Confirm what each local policy can lawfully cover with a licensed broker and local counsel.

When Buying Less Limit Is the Rational Call

The top layer is where the decision gets real. Company H pays about $215,000 a year for $10M that only responds once losses pass $15M. A 2.15% rate on line means the carrier prices that layer as a low-probability, high-severity event, plus expenses, capital charge and margin. You're always paying more than the expected loss. The question is whether protection against volatility is worth it.

Use these tests:

  1. Balance-sheet impact. An uninsured $10M loss is about a sixth of Company H's EBITDA. If that would breach loan covenants or force capital spending cuts, keep the layer.
  2. Contractual requirements. Customer contracts, lenders or regulators may require minimum limits. Check before you cut anything.
  3. Sublimit reality. If ransomware drives the $25M scenario and the primary sublimits it, the top layer won't respond. Fix the sublimit first or drop the layer.
  4. Alternative uses of the premium. $215,000 a year spent on faster ERP recovery or full privileged-access coverage may lower the severe-scenario loss more than the insurance lowers its cost.

Decision rule: buy the tower up to your modeled severe-but-plausible loss, minus what the business can absorb without breaching covenants or cutting planned investment. For Company H, that points to roughly $20M to $25M. A company with half the business-interruption exposure could rationally stop at $15M and save close to 30% of its cyber spend.

Next step: ask your broker for a layer-by-layer schedule showing rate on line, carrier, form and every exception to follow-form. Then run your three loss scenarios against it before you approve the renewal.

FAQ

Why is the primary layer so much more expensive than the excess layers? +
Is excess cyber insurance cost lower if I raise my retention? +
Should every excess layer follow form to the primary policy? +
RG
Risk Guardops Editorial Team
Independent research desk
Guides on Risk Guardops are produced by our editorial team. Pricing, features and regulations change often - confirm details with the vendor or a licensed professional before making decisions.
SPONSORED 2026 Vendor Pricing Benchmarks: Model exact seat pricing, setup fees, and ROI across our verified database.
Launch Calculator →